top of page
Welding Hi-Lo gauge.
Measures internal misalignment, Fit-up gap,
Bevel on Pipe and Plate end preparation, Crown height, and Pipe and Plate wall thickness.
Economy Single Purpose Hi-Lo Welding Gage Eliminates Rejects - Improves Productivity, Available in Inch or Metric
Adjustable Fillet Weld Gage
Unequal Leg Measurement Feature
Measure Fillet Weld & Weld Throat Thickness
Bridge Cam Gauge
Measures: • Angle of preparation 0° to 60° • Fillet weld throat size • Excess weld cap size • Depth of undercut • Depth of pitting • Fillet weld length & Misalignment (high-low)
Stainless steel, small, lightweight - fit in top pocket, inches and millimeters
Automatic Weld Size Gauge
For Accurate Calibration of Butt Fillet Type WeldsThe AWS Weld Gauge is for accurate calibration of butt and fillet type welds. The redesigned gauge is pocket size and easy to operate. Weld convexity and concavity sizes have automatically been
Check Reinforcement of Butt Weld
Check The Throat Of Fillet Weld
Check Leg Size Of Fillet Weld
"V-WAC" Single Weld Gage
Check Undercuts/Pits, Porosity, Crowns.
GAL-5 Inch / Fraction - Undercuts/Pits to 1/4 Inch, Crowns to 1/4 Inch by 1/64 Inch Increments.
GAL-5d Inch / Decimal - Undercuts/Pits to 0.240, Crowns to 0.240 by 0.020 Increments.
GAL-5 Metric - Undercuts/Pits to 6mm, Crowns to 6mm by 0.5mm Increments.
Pipe Depth Gage
Range is 0 to 1/2" in 1/64" & .020 Increments.
Arm Can be Locked in Place at Any Dimension.
UT Thickness Gauge
Ultrasonic Thickness gauge with various option to measure under coating and Data logger
3" STANDARD TWIST KNOT WIRE WHEEL, .014" STEEL FILL, 1/2"-3/8" ARBOR HOLE
10" STANDARD TWIST KNOT WIRE WHEEL, .023" STEEL FILL, 2" ARBOR HOLE
2-3/4" SINGLE ROW KNOT WIRE CUP BRUSH, .020" STEEL FILL, M10X1.50 NUT
4" STANDARD TWIST KNOT WIRE WHEEL, .014" STEEL FILL, 1/2"-3/8" ARBOR HOLE
1-1/8" KNOT WIRE END BRUSH, .020" STEEL FILL
2-3/4" SINGLE ROW KNOT WIRE CUP BRUSH, .020" STEEL FILL, M14 X 2.0 NUT
_jfif.jpg)
UT Flaw Detector
Ultrasonic Flaw Detectors from basic detectors to TOFD and Phased array
ROUGHNECK JR. 5" ROOT PASS WELD CLEANING BRUSH, .020" STEEL WIRE FILL, 7/8" ARBOR HOLE
1-1/8" KNOT WIRE END BRUSH, .0118" STEEL FILL
3" SMALL DIAMETER CRIMPED WIRE WHEEL, .0118" STEEL FILL, 1/2"-3/8" ARBOR HOLE
PLATER'S BRUSH, TAMPICO FILL, 4 X 18 ROWS
2" DOUBLE SPIRAL FLUE BRUSH, .012 STEEL FILL
bottom of page